Energy Academy

Master energy management, one principle at a time.

A structured path from the fundamentals everyone should know, through hands-on technical deep dives, to the leadership skills that drive an organisation toward net zero. Written for UK sites, with real numbers throughout.

3 levels · 40 courses · free to start, free account for the deep dives

The full curriculum

Three levels, aligned to how the energy profession develops expertise. Start at the foundations and go as deep as your role needs.

2
Level 2 · Technical mastery, system by system

System Deep Dives

Browse Level 2

Roll up your sleeves. Each course takes a major energy-using system — boilers, HVAC, motors, compressed air and more — and teaches how it works, where it wastes energy, and how to fix it.

01Energy Audits12 lessons · 124 minPlan and deliver a credible audit: walk-throughs, measurement, data analysis, and a prioritised register of opportunities.02Economic Analysis of Engineering Projects11 lessons · 117 minBeyond payback: time value of money, NPV, IRR, life-cycle costing and how to compare competing projects fairly.03Boilers & Fired Systems10 lessons · 102 minCombustion, excess air, flue-gas losses, blowdown and the practical levers for boiler-plant efficiency.04Steam & Condensate Systems12 lessons · 117 minSteam traps, flash steam, insulation, condensate return and distribution losses across a steam system.05CHP & Cogeneration13 lessons · 136 minWhen combined heat and power makes sense, sizing to heat demand, and assessing economic and carbon performance.06Waste Heat Recovery13 lessons · 135 minFind, grade and reuse waste heat — economisers, recuperators, heat exchangers and heat pumps.07Pinch Analysis & Process Integration17 lessons · 171 minOptimise heat exchange across a whole process at once: composite curves, the pinch point, minimum utility targets, network design and the economics of the approach temperature.08Buildings & the Building Envelope13 lessons · 136 minFabric, air-tightness, thermal bridging and glazing (U-values, g-values, low-E) — controlling loads at source.09HVAC Systems13 lessons · 138 minHeating, ventilation and cooling: system types, controls, setpoints, free cooling and demand-based operation.10Insulation Systems14 lessons · 143 minHeat-loss calculation, economic thickness, lagging of pipework and vessels, and surface-temperature safety.11Motors, Drives & Electrical Energy Management13 lessons · 127 minMotor efficiency classes, variable-speed drives, sizing, power factor and managing electrical demand.12Compressed Air Systems13 lessons · 127 minThe most expensive utility on site: leaks, pressure, control strategy, heat recovery and right-sizing.13Lighting13 lessons · 131 minLux levels, LED retrofits, controls, daylighting and lighting design for energy and comfort.14Thermal Energy Storage13 lessons · 135 minShifting heating and cooling loads in time — sensible, latent and the economics of storage.15Renewable Energy18 lessons · 178 minSolar PV, solar thermal, wind, heat pumps and biomass — sizing, integration and on-site generation.16Control Systems & BMS13 lessons · 136 minControl loops, sensors and actuators, BMS strategies for buildings, and process control on industrial sites.17Commissioning for Energy Management13 lessons · 134 minCommissioning and re-commissioning so systems actually deliver designed performance — and keep delivering it.18Refrigeration & Heat Pump Systems17 lessons · 174 minHow air conditioning, refrigeration and heat pumps work; thermodynamic cycles, efficiency, optimization.19Maintenance of Energy Systems13 lessons · 135 minHow maintenance regimes protect efficiency, and how to embed energy into planned and reactive maintenance.20Measurement & Verification (M&V)13 lessons · 136 minProve the savings: IPMVP options, baselines, adjustments and avoiding the traps that overstate results.
A peer to Levels 1–3, not a fourth tier

Or go deep on one sector

The same principles applied to one industry at a time — its processes, its energy benchmarks, and the regulation unique to it.

Industrial

Process-led sites where energy follows production: what is being made decides what is being used.

A free account unlocks the whole platform

Level 1 is open to everyone, no signup. A free account unlocks all of Levels 2 and 3 and every sector course — every lesson, quiz and interactive capstone — and saves your progress as you go.